Polyaluminum Chloride Yellow Powder

Polyaluminum chloride yellow powder is formed by spray tower drying. It is an inorganic polymer coagulant, referred to as PAC, and is mainly used in sewage treatment and drinking water treatment.
PAC polyaluminum chloride has the advantages of good spray drying stability, wide water area, fast hydrolysis speed, strong adsorption capacity, large alum flower formation, fast sedimentation, low turbidity of effluent, and good dehydration performance. The amount of spray-dried polyaluminium chloride is reduced, especially in the case of poor water quality. Compared with drum-dried polyaluminum chloride, the dosage of spray-dried products can be reduced by half, which not only reduces the labor intensity of workers, but also What is more important is to reduce the cost of water production for users. In addition, the use of spray drying products can ensure safety, reduce water accidents, and is very safe and reliable for residents' drinking water.

Polyaluminum chloride has the properties of adsorption, coagulation, precipitation, etc. It has poor stability and is corrosive. If it accidentally splashes on the skin, it should be washed off with water immediately. Production personnel should wear work clothes, masks, gloves, and long rubber boots. Polyaluminum chloride has the advantages of good spray drying stability, wide adaptability to water area, fast hydrolysis speed, strong adsorption capacity, large alum flower formation, fast sedimentation of dense mass, low turbidity of effluent, and good dehydration performance. The use of spray-dried products can ensure safety, reduce water accidents, and is very safe and reliable for residents' drinking water. Therefore, polyaluminum chloride is also referred to as high-efficiency polyaluminum chloride, high-efficiency PAC or high-efficiency spray-dried polyaluminum chloride. Polyaluminum chloride is suitable for raw water of various turbidities, and has a wide range of pH, but compared with polyacrylamide, its sedimentation effect is far inferior to polyacrylamide.

Polyaluminum Chloride Features:
1. The flocs form quickly, have good activity and filterability.
2. There is no need to add alkaline additives. In case of deliquescence, the effect will not change.
3. Adapt to wide PH value, strong adaptability and wide application.
4. The treated water has less salt content.
5. It can remove the pollution of heavy metals and radioactive substances to water.
6. High active ingredient, easy to store and transport.